Kailaa
February 12th, 2007, 09:26 AM
Now here's a challenge I haven't been able to solve, or find anywhere else, and boy have I been looking!
I just purchased a Zenith DVD/Audio system, and connected it to my Scientific Atlanta Cable box and Sharp SDTV as instructed here:
http://www.amethystone.net/img001.jpg
I connected the TV to the DVD/Audio using the component cables,as diagrammed, and connected the cable box as an "external" connection using the red and white audio plugs.
Now this would suffice, except for one issue.
I can get sound fine through the DVD player (set on DVD) and through the TV (set on Aux), however, my Zen Vision:M MP3/Video player no longer has a home.
I used to be able to hook up the portable player to my TV (on one of the television's 3 auxiliary channels) with the yellow/red/white A/V plugs, and it would would play through the TV speakers alone.
Now I can hook it up to the TV and get video, but no audio at all, and no other plugs on either the cable box or DVD/Audio system will route video or sound for my portable player.
Since the DVD/Audio system only gives me 1 Aux choice other than the DVD player, then I can only suppose that it's up to my TV to bear the players load and route the video and audio, but I'm at a loss as to how to get that to happen.
I'm guessing that I may need to find a a way to re-wire the cable box, DVD and TV, so that my player will still be able to route sound and video through the DVD/AV system.
And that's why I'm here.
Thanks for this forum, and thanks in advance for any help you can offer!
I just purchased a Zenith DVD/Audio system, and connected it to my Scientific Atlanta Cable box and Sharp SDTV as instructed here:
http://www.amethystone.net/img001.jpg
I connected the TV to the DVD/Audio using the component cables,as diagrammed, and connected the cable box as an "external" connection using the red and white audio plugs.
Now this would suffice, except for one issue.
I can get sound fine through the DVD player (set on DVD) and through the TV (set on Aux), however, my Zen Vision:M MP3/Video player no longer has a home.
I used to be able to hook up the portable player to my TV (on one of the television's 3 auxiliary channels) with the yellow/red/white A/V plugs, and it would would play through the TV speakers alone.
Now I can hook it up to the TV and get video, but no audio at all, and no other plugs on either the cable box or DVD/Audio system will route video or sound for my portable player.
Since the DVD/Audio system only gives me 1 Aux choice other than the DVD player, then I can only suppose that it's up to my TV to bear the players load and route the video and audio, but I'm at a loss as to how to get that to happen.
I'm guessing that I may need to find a a way to re-wire the cable box, DVD and TV, so that my player will still be able to route sound and video through the DVD/AV system.
And that's why I'm here.
Thanks for this forum, and thanks in advance for any help you can offer!